How To Reset Tire Pressure Sensor Ram 1500. How do you reset the ram 1500‘s tire pressure light when it’s going off for no reason? Drive the vehicle above 15 mph for at least 10 minutes.
Posted on nov 29, 2009 Switch on the ignition without starting the vehicle. To reset the tpms on the 2014 dodge ram 1500 make sure the tire pressure is correct, then turn on the vehicle.
Inflate All Tires To Pressure Listed On The Placard.
Reset the tire pressure warning light. Well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. Turn on the ignition, but before you start the engine up, press and hold the tpms reset button.
The Vehicle Will Learn Each Sensor Id And Turn The Tpms Light Off.
Now hit the reset button that is to the right of the steering wheel and wait ten minutes. If you have replaced the sensor, it must be programmed into the wcm by the dealership. Drive the vehicle above 15 mph for at least 10 minutes.
Release, Start The Engine, And It’ll Reset Itself As You Drive.
To reset the tpms to the dodge ram 1500, switch on the ignition before starting the vehicle press and hold down the tpms reset button; The light will flash three times. Kendrick l july 16, 2020.
Now Hit The Reset Button That Is To The Right Of The Steering Wheel And Wait Ten Minutes.
In some cases you may need to hold the button down till the light flashes. Sensor relearn procedure without a scan tool: Let the vehicle sit off for a minimum of 20 minutes.
How Do You Reset The Ram 1500‘S Tire Pressure Light When It’s Going Off For No Reason?
Now hit the reset button that is to the right of the steering wheel and wait ten minutes. Switch on the ignition without starting the vehicle. Start the engine and let it run for 20 minutes.